Severance homeowners can reach Eggers Electric at our Loveland shop, 3520 W Eisenhower Blvd, or our Fort Collins location.
Locally owned since 1973, with licensed, bonded and insured electricians and a Google 4.9 rating from 400+ Google reviews. Call 970-669-1883 or Schedule Service online.
“Andy from Eggers Electric was terrific when he came to do an estimate for us.”
Severance went from a very small town to a growing one in a short time, so most homes are recent builds in subdivisions spreading out from the old town center. In those houses the panel is usually in good shape but full. Owners call when they want to add a garage charger, a hot tub, a finished basement or a shop circuit and find no open spaces. Homes on larger lots outside the subdivisions bring longer runs to detached garages and sheds, which have to be sized for voltage drop. See panel upgrade.
Severance is in Weld County. Inside town limits, electrical permits go through the Town of Severance, and Weld County handles unincorporated addresses. We pull the permit and are there for the inspections.
Severance is served by Xcel Energy or Poudre Valley REA, depending on where in or around town you live. We confirm it for your address and set up the disconnect and reconnect when a service upgrade or meter change needs one.
Besides full panels, the most common Severance jobs are 240-volt circuits for EV chargers and hot tubs, subpanels for detached garages and shops, exterior and security lighting, and portable generator hookups with an inlet and a transfer switch or listed interlock so the furnace can run during an outage. See generators.
We cover Severance and nearby Windsor, Timnath, Greeley and Fort Collins.
More capacity for EVs, heat pumps and remodels
Home EV charger installation
Standby generators and transfer switches
Indoor and outdoor lighting and ceiling fans
Outlets, breakers and flickering lights
Replace old wiring and protect what you plug in
Offices, shops and small businesses
Popular in Severance: panel upgrades · EV charger installation · generators · hot tub circuits · exterior lighting · all home electrical services
Most visits start with the $89 Eggers Safety Check & Estimate Visit: a licensed electrician diagnoses the problem and does our 8-point Eggers Safety Inspection (not a city permit inspection): we verify grounding and bonding, spot-check outlets and switches, and visually check the panel, GFCI protection, smoke and CO alarms, visible wiring, exterior electrical and whole-home surge protection. You get a written price before work starts, and the $89 is credited toward your job when you go ahead. Call 7 days, 7am–8pm; office hours are Monday–Friday, 7:30am–4pm.
Severance is mostly newer subdivisions, with some older homes near the original town center. We wire basement finishes, EV chargers, hot tubs and added circuits there.
A load calculation tells us. It may show you can add a charger as is, with a load-management device, or with a charger set to a lower current. A subpanel adds breaker space, but not more total power.
Yes. Finishing a basement needs a permit, and the job typically includes smoke alarms, plus CO alarms where required, for example if you have gas appliances or an attached garage. We also check that your panel has room for the new circuits.
Common signs are frequent tripping, no open breaker spaces, an old fuse box, double-tapped breakers, or plans for an EV charger, heat pump or hot tub. A load calculation confirms it, and replacing service equipment now requires a surge protector.
Only small plug-and-play tubs made for a 120-volt GFCI outlet can plug in, and never through an extension cord. Most full-size tubs need a dedicated, hardwired 240-volt GFCI-protected circuit.
A breaker trips to protect the wiring from an overloaded circuit, a short circuit or a ground fault. Unplug a few things and reset it once. If it trips again right away, trips with nothing plugged in, or you notice heat or a burning smell, stop resetting it and call a licensed electrician.
Call 7 days, 7am–8pm at 970-669-1883, or Schedule Service online. Most visits start with the $89 Eggers Safety Check & Estimate Visit: a licensed electrician does our 8-point Eggers Safety Inspection and gives you a written price, and the $89 is credited toward the job when you go ahead.
“Andy from Eggers Electric was terrific when he came to do an estimate for us. Our to do list grew and evolved as we talked about options. He was helpful, presented a variety of options and approaches - from needs based on safety, all the way to the top of our "wish list". He is professional, engaging, experienced, and has a great sense of humor!…”
“I requested quotes from four Northern Colorado electric companies, and Eggers provided the most competitive rate by a wide margin.…”Google review · Fort Collins · Jun 2025
“Bill and Chris are the type of guys you want doing work on your home. They are timely, professional and kind. I am very happy with Eggers Electric and will recommend them to my friends and family.”Google review · Loveland · Feb 2026
“My family has been a customer of Eggers Electric for four generations. There is nothing better than to have a family-owned local company provide quality, friendly service in the community.…”Google review
Questions? Call 970-669-1883 or email info@eggerselectric.com.
Locally owned since 1973. Severance: call 970-669-1883, 7 days, 7am–8pm.
Google 4.9 · 400+ reviews
Need an electrician?
Start with an $89 Eggers Safety Check & Estimate Visit, credited toward your job.
Schedule Serviceor call 970-669-1883 · Call 7 days, 7am–8pm
Ask a question
Send us a message and we’ll follow up. Need help now? Call 970-669-1883.
