OVER 50 YEARS★ LOCALLY OWNED ★SINCE1973
Eggers Electric service vans parked at the Loveland shop

GFCI outlets in Loveland & Northern Colorado. Shock protection where water is.

GFCI outlets and breakers installed, replaced and fixed by licensed electricians.

Call 970-669-1883
“More importantly he fixed the problem! …Two other electricians… could not resolve it.”
Google review · Fort Collins · Oct 2025 Repairs & troubleshooting
Call 7 days, 7am–8pm

Schedule service or ask a question

Ask a questionWe’ll follow up Call 970-669-1883
Call 7 days, 7am–8pm
Same-day service, depending on our schedule.

Why homeowners choose Eggers

  • Locally owned in Loveland since 1973
  • Licensed electricians
  • Permits pulled and inspections handled
  • A written price before every job

Serving Loveland, Fort Collins and Northern Colorado · 970-669-1883

Our promise

  • Upfront pricingYou approve the price before work starts.
  • On-time arrivalWe show up when we say we will.
  • Workmanship warranty2-year workmanship warranty on our work.
  • Licensed electriciansBonded, insured and local.

GFCI work we do

GFCIs are required in more places than older homes have, and they wear out over time.

Add GFCI protection

Kitchens, baths, garages, outdoors, laundry areas and unfinished basements.

Replace worn GFCIs

GFCIs that won’t reset or won’t trip when tested.

Nuisance tripping

Find the moisture, appliance or wiring problem behind repeat trips.

Outdoor outlets

Weather-resistant GFCI outlets with in-use covers.

Two-prong outlets

GFCI protection on ungrounded circuits, labeled “No equipment ground.”

GFCI breakers

GFCI protection at the panel for a whole circuit.

GFCI guide for Loveland homes

Where GFCI protection matters, what causes nuisance tripping, and how we approach upgrades in older homes.

Signs you should have GFCIs checked

Outlets near water without test buttons

If your kitchen counters, bathrooms, garage, laundry area or outdoor outlets have no GFCI outlet or GFCI breaker protecting them, that’s worth a look. Many Loveland homes built before the 1990s have far fewer protected locations than today’s homes.

A GFCI that trips again and again

A GFCI that trips with nothing plugged in, trips every time it rains, or won’t reset is telling you something. The cause can be moisture in an outdoor box, a damaged cord, a failing appliance or a worn-out device. We test to find which one it is before replacing anything.

Dead outlets you can’t explain

One GFCI can protect several outlets downstream, sometimes in another room or the garage. When a group of outlets goes dead, a tripped GFCI is often the reason. We find and label which outlets each GFCI protects so you know where to look next time.

Test buttons that don’t work

Pressing TEST should cut power. If it doesn’t, or the device is old and discolored, it should be replaced. We recommend pressing TEST once a month.

How we plan GFCI work

GFCI outlet or GFCI breaker?

Sometimes a GFCI outlet at the first location on a circuit is the cleanest fix. Other times a GFCI breaker in the panel makes more sense, for example when the first outlet is hard to reach or a circuit feeds several wet locations. We explain the options and the tradeoffs.

Older homes and two-prong outlets

In homes without a ground wire, a GFCI can add shock protection to two-prong locations. It doesn’t add a ground, so those outlets are labeled ‘No Equipment Ground’ (and ‘GFCI Protected’), and some electronics and surge strips still won’t be properly grounded. We talk through when rewiring or adding a ground is the better long-term answer.

What affects the price

The number of locations, whether we use outlets or breakers, how easy the boxes are to reach, and whether we find damaged wiring along the way. You get a written price before any work starts.

Permits and the walkthrough

When the work needs a permit, we pull it and schedule the inspection. Before we leave, we test every protected outlet with you. The work is backed by our 2-year workmanship warranty.

How GFCI work goes

  1. Eggers Safety InspectionA licensed electrician runs an 8-point safety check and looks at the work you need.
  2. Find what’s protectedWe trace which outlets each GFCI protects and test them.
  3. Upfront priceYou get a clear, written price and approve it before any work starts.
  4. Install or replaceWe install GFCI outlets or breakers and label downstream outlets.
  5. WalkthroughWe test everything with you and answer your questions. The work is backed by our 2-year workmanship warranty.

Every visit includes the $89 Eggers Safety Inspection

An 8-point electrical safety check plus your detailed estimate. The $89 is credited toward your job if you move forward. It’s only due if you decide not to go ahead.

The 8 points: electrical panel, main grounding & bonding, GFCI protection, smoke & CO detectors, outlets & switches, visible wiring, exterior electrical, and whole-home surge protection. Each one is marked Pass or Needs Attention.

From a recent Eggers job

Outdoor GFCI outlet by Eggers Electric in Northern Colorado
Outdoor GFCI outlet by Eggers Electric in Northern Colorado
Tester confirming a new GFCI outlet in a kitchen backsplash, Northern Colorado
Testing a new GFCI outlet in a kitchen backsplash to make sure it trips the way it should. Northern Colorado.

What our neighbors say

400+ Google reviews
“I called them early this morning, and within a couple of hours Chris was here to figure out why one circuit kept kicking the breaker. Turns out it was a floor outlet that had been cooking for a while. We had no clue.…”
Google reviewRepairs & troubleshooting
  • “Andy came to our house to add an electrical outlet. While looking at possible solutions he was able to find us a solution that was half the price of the first solution he came up with…”
    Google review · Loveland · Dec 2025 Wiring, outlets & upgrades
  • “Andy helped us resolve a mystery outlet power loss after a counter installation. He was able to narrow it down, show me the problem, advise a solution, and help us prove this to the counter install folks…”
    Google review · Jun 2025 Repairs & troubleshooting
  • “I had Andy update my smoke alarms and combo carbon monoxide/smoke alarms in my house. He was very professional, answered all of my questions and he did an excellent job!…”
    Google review · Loveland · Sep 2026 Wiring, outlets & upgrades
  • BBB Accredited Business, A+ rating
  • Eggers Electric Google reviews
  • 2024 Quality Business Awards winner
  • 2023 NoCo Style Readers’ Choice winner
  • Eggers Electric on Yelp
Eggers Electric crew in front of company vans in Northern Colorado

Locally owned in Loveland since 1973. Your neighbors, not a national chain.

About Eggers Electric
Map showing Eggers Electric at 3520 W Eisenhower Blvd, Loveland, CO 80537
Eggers Electric3520 W Eisenhower Blvd, Loveland, CO 80537

GFCI questions

Questions? Call 970-669-1883 or email info@eggerselectric.com.

What does a GFCI outlet do?
It compares the current going out and coming back on a circuit and shuts off power in a fraction of a second if some is leaking, for example through a person, to reduce shock risk.
Where is GFCI protection required?
In homes, typically in bathrooms, kitchens, garages, outdoors, unfinished basements, laundry areas and near sinks, as set by the electrical code your city or county has adopted. That’s more places than older homes have.
Why does my GFCI keep tripping?
Moisture in an outdoor or bathroom outlet, a faulty appliance, or a worn GFCI are common causes. Unplug everything and reset; if it trips with nothing plugged in, have it checked.
A bunch of outlets died at once. Is it a GFCI?
Often. One GFCI can protect other outlets down the line, sometimes in another room or the garage. Look for a tripped GFCI and press RESET. If it won’t reset, call us.
How often should I test GFCI outlets?
Manufacturers recommend testing monthly with the TEST and RESET buttons.
Can a GFCI replace a two-prong outlet?
Yes. A GFCI can protect an ungrounded circuit; the outlets are labeled “No equipment ground.” See wiring and rewiring.
Schedule service onlinePick a day and time that works for you.
Loading available times…
Prefer to talk? Call 970-669-1883, 7 days a week, 7am–8pm.
Call 970-669-1883

Google 4.9 · 400+ reviews

Need an electrician?

Every visit includes the repair, installation or service you called for, plus an $89 Eggers Safety Inspection, credited toward your job.

Schedule Service

Have a question? Ask us

or call 970-669-1883 · Call 7 days, 7am–8pm

Ask a question

How can we help?

Send us a message and we’ll follow up. Need help now? Call 970-669-1883.