Photo: "Severance, CO.jpg" by Jared Winkler, CC BY-SA 4.0 (https://creativecommons.org/licenses/by-sa/4.0), via Wikimedia Commons

Electrician in Severance, CO. Locally owned since 1973.

Severance homeowners can reach Eggers Electric at our Loveland shop, 3520 W Eisenhower Blvd, or our Fort Collins location.

Locally owned since 1973, with licensed, bonded and insured electricians and a Google 4.9 rating from 400+ Google reviews. Call 970-669-1883 or Schedule Service online.

Call 970-669-1883

“…they are remarkably responsive to questions and needs during a project.”

Google review · Fort Collins · Feb 2026 EV & inspections

Call 7 days, 7am–8pm

Schedule service or ask a question

Ask a questionWe’ll follow up Call 970-669-1883

Call 7 days, 7am–8pm

Same-day appointments may be available, depending on our schedule.

Our promise

Upfront pricingYou approve the price before work starts.
On-time arrivalWe give you an arrival window, usually 1 to 2 hours, and call if anything changes.
Workmanship warranty1-year workmanship warranty on our work.
Licensed electriciansLicensed, bonded and insured.

Severance Homes

Severance went from a very small town to a growing one in a short time, so most homes are recent builds in subdivisions spreading out from the old town center. In those houses the panel is usually in good shape but full. Owners call when they want to add a garage charger, a hot tub, a finished basement or a shop circuit and find no open spaces. Homes on larger lots outside the subdivisions bring longer runs to detached garages and sheds, which have to be sized for voltage drop. See panel upgrade.

Permits in Severance

Severance is in Weld County. Inside town limits, electrical permits go through the Town of Severance, and Weld County handles unincorporated addresses. We pull the permit and are there for the inspections.

Electric Service in Severance

Severance is served by Xcel Energy or Poudre Valley REA, depending on where in or around town you live. We confirm it for your address and set up the disconnect and reconnect when a service upgrade or meter change needs one.

What Severance Owners Ask Us For

Besides full panels, the most common Severance jobs are 240-volt circuits for EV chargers and hot tubs, subpanels for detached garages and shops, exterior and security lighting, and portable generator hookups with an inlet and a transfer switch or listed interlock so the furnace can run during an outage. See generators.

Around Severance

We cover Severance and nearby Windsor, Timnath, Greeley and Fort Collins.

Electrical Services in Severance

All home electrical services

Panel upgrades

More capacity for EVs, heat pumps and remodels

EV chargers

Home EV charger installation

Generators and transfer switches

Standby generators and transfer switches

Lighting and ceiling fans

Indoor and outdoor lighting and ceiling fans

Repairs and troubleshooting

Outlets, breakers and flickering lights

Wiring, GFCI and surge protection

Replace old wiring and protect what you plug in

Light commercial work

Offices, shops and small businesses

Your fix plus a full safety check

Every visit includes the repair, installation or service you called us for, plus the $89 Eggers Safety Inspection: a licensed electrician diagnoses the problem and does our 8-point Eggers Safety Inspection (not a city permit inspection): we verify grounding and bonding, spot-check outlets and switches, and visually check the panel, GFCI protection, smoke and CO alarms, visible wiring, exterior electrical and whole-home surge protection. You get a written price before work starts, and the $89 is credited toward your job when you go ahead. Call 7 days, 7am–8pm; office hours are Monday–Friday, 7:30am–4pm.

Common electrical questions from Severance homeowners

Severance is mostly newer subdivisions, with some older homes near the original town center. We wire basement finishes, EV chargers, hot tubs and added circuits there.

Repairs in Severance homes

Can my Severance home handle a Level 2 EV charger?

A load calculation tells us. It may show you can add a charger as is, with a load-management device, or with a charger set to a lower current. A subpanel adds breaker space, but not more total power.

Does finishing a basement need electrical permits?

Yes. Finishing a basement needs a permit, and the job typically includes smoke alarms, plus CO alarms where required, for example if you have gas appliances or an attached garage. We also check that your panel has room for the new circuits.

When does a Severance home need a panel upgrade?

Common signs are frequent tripping, no open breaker spaces, an old fuse box, double-tapped breakers, or plans for an EV charger, heat pump or hot tub. A load calculation confirms it, and replacing service equipment now requires a surge protector.

Upgrades for Severance homes

Can I plug in a hot tub?

Only small plug-and-play tubs made for a 120-volt GFCI outlet can plug in, and never through an extension cord. Most full-size tubs need a dedicated, hardwired 240-volt GFCI-protected circuit.

Why do breakers keep tripping in my Severance home?

A breaker trips to protect the wiring from an overloaded circuit, a short circuit or a ground fault. Unplug a few things and reset it once. If it trips again right away, trips with nothing plugged in, or you notice heat or a burning smell, stop resetting it and call a licensed electrician.

How do I get started in Severance?

Call 7 days, 7am–8pm at 970-669-1883, or Schedule Service online. Every visit includes the repair, installation or service you called us for, plus the $89 Eggers Safety Inspection: a licensed electrician does our 8-point Eggers Safety Inspection and gives you a written price, and the $89 is credited toward the job when you go ahead.

From a recent Eggers job

Kitchen recessed lighting and island pendants by Eggers Electric in Northern Colorado

Level 2 EV charger installation by Eggers Electric in Northern Colorado

Whole-home surge protector mounted at the outdoor panel, Northern Colorado — Whole-home surge protector added at the main panel to guard electronics and appliances. Northern Colorado.

What our neighbors say

400+ Google reviews

“Andy came to our house to add an electrical outlet. While looking at possible solutions he was able to find us a solution that was half the price of the first solution he came up with. It was great that he was willing to give us a cheaper solution to choose from. He was kind and very professional.”

Google review · Loveland · Dec 2025Wiring, outlets & upgrades

“I requested quotes from four Northern Colorado electric companies, and Eggers provided the most competitive rate by a wide margin…”
Google review · Fort Collins · Jun 2025 Repairs & troubleshooting
“I had a ceiling fan installed by “Sterling”, who also took the time to set up the Bond Home app and wrote down all the instructions and temporary password for me…”
Google review · Loveland · Aug 2024 Fans & lighting
“I called them early this morning, and within a couple of hours Chris was here to figure out why one circuit kept kicking the breaker. Turns out it was a floor outlet that had been cooking for a while…”
Google review Repairs & troubleshooting

Read all reviews

Eggers Electric crew in front of company vans in Northern Colorado — Locally owned in Loveland since 1973. Your neighbors, not a national chain.
About Eggers Electric

Serving Northern Colorado

Full service area

Map showing Eggers Electric at 3520 W Eisenhower Blvd, Loveland, CO 80537

Eggers Electric3520 W Eisenhower Blvd, Loveland, CO 80537

Severance electrician questions

Questions? Call 970-669-1883 or email info@eggerselectric.com.

Do you serve Severance, CO?

Yes. Eggers Electric serves Severance homes from our Loveland shop and Fort Collins location. Call 970-669-1883, 7 days, 7am–8pm.

Who issues electrical permits in Severance?

The Town of Severance inside town limits, and Weld County for unincorporated addresses. We pull the permit.

Can you run power to a detached garage or shop in Severance?

Yes. We install a feeder and subpanel sized for the distance and the load, under the permit the job needs.

My builder panel is full. What are my options?

The options are a subpanel for more breaker space, a load-management device, or a panel upgrade. A load calculation tells us which fits, and we explain each before any work starts.

What does the $89 Eggers Safety Inspection include?

A licensed electrician looks at the problem you called about and does our 8-point Eggers Safety Inspection (an in-home safety check, not a city or county permit inspection). We check your main grounding and bonding connections, and visually check the parts we can see and safely reach: the electrical panel, GFCI protection, smoke and CO alarms, visible wiring, exterior electrical, and whole-home surge protection. We spot-check outlets and switches, or check them more closely if you have had problems with them. Each of the 8 points is marked Pass or Needs Attention, with notes and any recommended improvements, plus a written price before work starts. It is not a code certification, a home inspection or a permit inspection, and it can't find every problem hidden inside walls. The $89 is credited toward your job when you go ahead.