OVER 50 YEARS★ LOCALLY OWNED ★SINCE1973
Eggers Electric service vans parked at the Loveland shop

GFCI outlet won't reset? Here's why

A GFCI outlet that won't reset usually has one of three problems: it isn't getting power, it still senses a ground fault (often from moisture or a plugged-in appliance), or the GFCI itself has reached the end of its life. Unplug everything, check the breaker and any other GFCI upstream, and let wet outdoor outlets dry. If it still won't reset, a licensed electrician can find out why.

Call 970-669-1883
“…they are remarkably responsive to questions and needs during a project.”
Google review · Fort Collins · Feb 2026 EV & inspections
Call 7 days, 7am–8pm

Schedule service or ask a question

Call 7 days, 7am–8pm
Same-day service is often available.

Try these first

  1. Unplug everything from the GFCI and the outlets it protects, then press RESET firmly until it clicks.
  2. Check the breaker. Many GFCIs won't reset without power. Reset a tripped breaker once.
  3. Look for another GFCI. One GFCI can feed others. Check bathrooms, the kitchen, the garage, the basement and outdoors, and reset those first.
  4. Let it dry. Outdoor and garage GFCIs often trip after rain, sprinklers or snowmelt. Give a wet box time to dry before trying again.
  5. Stop if it's warm, scorched or buzzing. Turn off the breaker and call us.

Why a GFCI won't reset

No power reaching it

Most newer GFCIs need power to reset. A tripped breaker, an upstream GFCI or a loose wire feeding the outlet will keep RESET from latching.

A fault is still there

Water in an outdoor box, a damaged cord, or an appliance with a ground fault, like an old freezer or pressure washer, will trip it again immediately.

The GFCI is worn out

GFCIs wear out. Newer models test themselves, and many are built to refuse to reset once they can no longer protect you. Replacement is the fix, never a standard outlet.

Wired backwards

Newer GFCIs won't reset if the incoming power is connected to the LOAD terminals instead of LINE. This often follows a do-it-yourself replacement.

Too much on one GFCI

Long runs of outlets, or outdoor outlets and garage outlets on the same GFCI, give it more places to pick up moisture and small leaks. Splitting the protection can stop repeat trips.

GFCI outlet vs GFCI breaker

GFCI outletGFCI breaker
Where you reset itAt the outletAt the panel
ProtectsThat outlet, and outlets wired after itThe whole circuit
Good whenThe first outlet on the circuit is easy to reachThe first outlet is hard to reach, or the circuit feeds several wet locations

We explain which fits your circuit. See GFCI outlets.

How we fix it

  1. Eggers Safety InspectionOur 8-point check includes GFCI protection across the home.
  2. Trace the circuitWe find which outlets each GFCI protects and where the power comes from.
  3. Find the faultWe test for moisture, damaged wiring, a bad appliance or a failed device.
  4. Written price, then repairReplace the GFCI, fix the wiring or split the circuit, and label protected outlets.
  5. Test with youEvery protected outlet is tested before we leave. The work is backed by our 1-year workmanship warranty.

What's included in every visit

On every visit, a licensed Eggers electrician handles the job you called about and runs our full Safety Inspection. There's a $89 service charge — and it is credited toward your job if you move forward.

The 8 points: electrical panel, main grounding & bonding, GFCI protection, smoke & CO detectors, outlets & switches, visible wiring, exterior electrical, and whole-home surge protection. Each one is marked Pass or Needs Attention.

Eggers Electric crew in front of company vans in Northern Colorado

Locally owned in Loveland since 1973. Your neighbors, not a national chain.

About Eggers Electric

GFCI reset questions

Questions? Call 970-669-1883 or email info@eggerselectric.com.

Why homeowners choose Eggers

  • Locally owned in Loveland since 1973
  • Licensed electricians
  • Permits pulled and inspections handled
  • Eggers Safety Inspection on every visit

Serving Loveland, Fort Collins and Northern Colorado · 970-669-1883

Why won't my GFCI outlet reset?

Usually it has no power, it still senses a fault, or it has worn out. Unplug everything, check the breaker and any other GFCI upstream, and let wet outdoor outlets dry. If it still won't reset, call an electrician.

Why does my outdoor GFCI trip when it rains?

Water is getting into the box, the cover or a cord connection. A weather-resistant GFCI with an in-use cover, and sealing or replacing the box, usually fixes it.

Can a GFCI go bad?

Yes. GFCIs wear out over time. Many newer GFCIs refuse to reset once they fail their own self-test, so a GFCI that won't reset with no load and good power usually needs replacing.

Why are several outlets dead but the GFCI looks fine?

They may be protected by a different GFCI, sometimes in another room, the garage or outside. Find and reset that one. If none are tripped, the problem may be a loose connection.

Can I replace a GFCI with a regular outlet?

No. If GFCI protection is required in that location, it has to stay protected. Replace a failed GFCI with a new GFCI or protect the circuit with a GFCI breaker.

How often should I test my GFCIs?

Manufacturers recommend testing monthly: press TEST, confirm the power goes off, then press RESET.

Schedule service onlinePick a day and time that works for you.
Loading available times…
Prefer to talk? Call 970-669-1883, 7 days a week, 7am–8pm.
Call 970-669-1883
Eggers Safety Inspection + diagnose/estimate — $89 service charge, credited toward your job. Schedule Service ›

Through Dec 17: donate food for the Larimer County Food Bank and we’ll waive the $89.

Google 4.9 · 400+ reviews

Need an electrician?

On every visit, a licensed Eggers electrician handles the job you called about and runs our full Safety Inspection. There's a $89 service charge — and it is credited toward your job if you move forward.

Through Dec 17: bring non-perishable food for the Larimer County Food Bank and we’ll waive the $89 service charge.

Schedule Service

Have a question? Ask us

or call 970-669-1883 · Call 7 days, 7am–8pm

Ask a question

How can we help?

Send us a message and we’ll follow up. Need help now? Call 970-669-1883.