To get your Fort Collins home ready for an electrical inspection, clear access to the panel, make sure breakers are labeled, test your smoke and CO alarms and GFCI outlets, and write down anything that’s been acting up. Know which inspection you’re getting, too: a home inspector’s general check, the City’s inspection of permitted work, or an electrician’s safety inspection. Each looks at different things.
Three kinds of electrical inspection
| What it is | When you get it | |
|---|---|---|
| Home inspection | A general inspector’s visual check of the whole house, electrical included | Usually when buying a home |
| Permit inspection | The City of Fort Collins (or Larimer County) checking permitted work | After a panel upgrade, new circuit, EV charger or remodel |
| Electrician’s safety inspection | A licensed electrician’s check of the panel, grounding, GFCI, alarms, outlets and wiring | Before buying or selling, in an older home, before a big addition or after a problem |
When a Fort Collins home should get one
- Buying or selling. A home inspector often flags electrical items and recommends an electrician look closer. See home inspection electrical repairs.
- Older homes. About 31% of Fort Collins homes were built before 1980 (U.S. Census Bureau, American Community Survey, 2024). Those are where we most often find small panels, two-prong outlets and wiring that’s been added to over the years.
- Before a big new load. An EV charger, heat pump, hot tub or basement finish starts with a load calculation.
- After a problem. Breakers that keep tripping, warm outlets, flickering or a burning smell.
- For insurance. Some insurers ask about the panel type or older wiring.
Checklist: getting ready
- Clear the panel. Keep about 3 feet clear in front of it, and move anything stored against it.
- Label the breakers. Or note the ones you’re unsure about.
- Test smoke and CO alarms. Replace dead batteries and note alarms with an old date on the back. See smoke and CO alarm placement.
- Press the GFCI test buttons. Then reset them. Note any that won’t reset.
- Make a list. Dead outlets, flickering, warm switches, breakers that trip, anything a previous inspector flagged.
- Find your paperwork. Permits or invoices for past electrical work, if you have them.
- Clear the way. To the panel, the attic access and exterior outlets.
What we commonly find
Ungrounded two-prong outlets, missing GFCI protection in kitchens, baths, garages and outdoors, double-tapped breakers, full panels, older panel brands with known problems, alarms past their replacement date and DIY wiring. See is my electrical panel safe? and how to update two-prong outlets.
How to choose who inspects
Pick a licensed electrician who explains what they find in writing, separates what’s unsafe from what’s nice to have, and gives you a written price before any repair. On every visit, a licensed Eggers electrician handles the job you called about and runs our full Safety Inspection. There’s a $89 service charge — and it is credited toward your job if you move forward. See electrical inspections. Call 7 days, 7am–8pm at 970-669-1883 or Schedule Service.
Written by the Eggers Electric team
Frequently asked questions
What does an electrical inspection check?
An electrician’s safety inspection covers the panel, main grounding and bonding, GFCI protection, smoke and CO alarms, outlets and switches, visible wiring, exterior electrical and surge protection.
Is a home inspection the same as an electrical inspection?
No. A home inspector does a general visual check of the whole house and often recommends that an electrician look closer at what they flag.
Who does permit inspections in Fort Collins?
The City of Fort Collins inside city limits and Larimer County outside them. They inspect work done under a permit; the contractor schedules it.
How should I prepare for an electrical inspection?
Clear about 3 feet in front of the panel, label the breakers, test smoke and CO alarms and GFCI outlets, and list anything that’s been acting up.

