OVER 50 YEARS★ LOCALLY OWNED ★SINCE1973
Eggers Electric service vans parked at the Loveland shop

100-amp to 200-amp service upgrades in Loveland & Fort Collins

You may need to go from 100 to 200 amps if a load calculation shows your home can't safely carry what you run and plan to add, like an EV charger, heat pump, electric range or hot tub. Not every home does. Eggers Electric runs the numbers first, then handles the service upgrade, permit and utility work in Loveland, Fort Collins and Northern Colorado.

Call 970-669-1883
“…they are remarkably responsive to questions and needs during a project.”
Google review · Fort Collins · Feb 2026 EV & inspections
Call 7 days, 7am–8pm

Schedule service or ask a question

Call 7 days, 7am–8pm
Same-day service is often available.

Our promise

  • Upfront pricingYou approve the price before work starts.
  • On-time arrivalWe show up when we say we will.
  • Workmanship warranty1-year workmanship warranty on our work.
  • Licensed electriciansBonded, insured and local.

Signs a 100-amp service may be too small

  • You're adding a Level 2 EV charger, especially a second one
  • You're switching from gas to a heat pump, electric range or electric water heater
  • You're adding a hot tub, shop, addition or ADU
  • Breakers trip when several big appliances run at once
  • The main breaker has tripped
  • The panel has no open spaces and the service is 100 amps or less

One sign alone doesn't mean you need 200 amps. It means it's time for a load calculation.

How we decide: the load calculation

A load calculation adds up your home's size, its fixed appliances, heating and cooling, and anything you plan to add, using the load calculation methods in the National Electrical Code (Article 220).

It gives you one of four answers:

  1. You have room. Add the new load on your current service.
  2. Manage the load. A load-management device or a lower charger setting can fit the new load without an upgrade.
  3. Add breaker space. A subpanel or new panel, same service size.
  4. Upgrade the service. Go to 200 amps (or what the numbers show).

What a service upgrade includes

PartWho owns it (usually)Changed in a 100→200A upgrade?
Utility service drop or underground lateralUtilitySometimes; the utility decides
MeterUtilityUtility sets or swaps it
Meter base (socket)HomeownerUsually, to one rated for the new service
Service mast or entrance conductorsHomeownerUsually
Main panel and main breakerHomeownerYes
Grounding and bondingHomeownerBrought up to current code
Surge protectionHomeownerAdded; required when service equipment is replaced

Ownership details vary by utility. We confirm with yours before the job.

Panel swap vs service upgrade

Panel swap (same amps)Service upgrade (more amps)
FixesUnsafe, damaged or full panelNot enough total capacity
Meter baseUsually staysUsually replaced
UtilityDisconnect and reconnectReview, possibly new service, disconnect and reconnect
Time and schedulingShorterLonger; depends on utility scheduling

How a 100 to 200 amp upgrade works

  1. Your visit and Safety InspectionA licensed electrician runs the 8-point safety check and gathers what we need for the load calculation.
  2. Load calculation and optionsYou see the result and a written price for each option that works.
  3. Utility paperworkIn Loveland, Loveland Water and Power requires its Electric Service Worksheet before the City issues the permit. Other utilities have their own steps. We handle them.
  4. PermitWe pull the electrical permit from your city or county.
  5. Install dayThe utility disconnects service; we replace the meter base, service equipment and panel, move circuits over, and correct grounding and bonding.
  6. Inspection and reconnectThe city or county inspects, and the utility reconnects power.
  7. WalkthroughWe show you the new panel and labels. Backed by our 1-year workmanship warranty.

What's included in every visit

On every visit, a licensed Eggers electrician handles the job you called about and runs our full Safety Inspection. There's a $89 service charge — and it is credited toward your job if you move forward.

The 8 points: electrical panel, main grounding & bonding, GFCI protection, smoke & CO detectors, outlets & switches, visible wiring, exterior electrical, and whole-home surge protection. Each one is marked Pass or Needs Attention.

How long does it take?

The install itself typically takes one day, with the power off for about 4 to 8 hours. Jobs that need a new meter base, a panel move or underground service work can take longer or need a second day. Most of the calendar time is permit and utility scheduling, so the whole process from first visit to finished work typically takes a few weeks, depending on your city and utility. You get a timeline with your estimate, and we tell you ahead of time when the power will be off. See how long does a panel upgrade take?

What affects the cost

  • Whether the meter base, service mast or underground service has to change
  • Overhead vs underground service
  • Distance between the meter and the panel
  • Number of circuits to move, and their condition
  • Grounding and bonding corrections
  • Utility requirements and fees, and permit fees for your city or county
  • Whether you choose load management instead

You get a written price before any work starts.

What our neighbors say

400+ Google reviews
“I called them early this morning, and within a couple of hours Chris was here to figure out why one circuit kept kicking the breaker. Turns out it was a floor outlet that had been cooking for a while. We had no clue.…”
Google reviewRepairs & troubleshooting
  • “I requested quotes from four Northern Colorado electric companies, and Eggers provided the most competitive rate by a wide margin…”
    Google review · Fort Collins · Jun 2025 Repairs & troubleshooting
  • BBB Accredited Business, A+ rating
  • Eggers Electric Google reviews
  • 2024 Quality Business Awards winner
  • 2023 NoCo Style Readers’ Choice winner
  • Eggers Electric on Yelp
Eggers Electric crew in front of company vans in Northern Colorado

Locally owned in Loveland since 1973. Your neighbors, not a national chain.

About Eggers Electric

200 amp upgrade questions

Questions? Call 970-669-1883 or email info@eggerselectric.com.

Why homeowners choose Eggers

  • Locally owned in Loveland since 1973
  • Licensed electricians
  • Permits pulled and inspections handled
  • Eggers Safety Inspection on every visit

Serving Loveland, Fort Collins and Northern Colorado · 970-669-1883

Do I need 200 amps?

Not every home does. Many homes with 100-amp service do fine. Homes adding an EV charger, heat pump, induction range or hot tub often need more. A load calculation tells you.

How long does it take to upgrade from 100 to 200 amps?

The install typically takes one day, with the power off for about 4 to 8 hours. Permit and utility scheduling add calendar time, so the whole process typically takes a few weeks. We give you a timeline with your estimate.

Will my power be off?

Yes, for part of install day, typically about 4 to 8 hours. We tell you ahead of time so you can plan.

Does the utility have to approve a service upgrade?

Yes. The utility reviews the change and handles the disconnect, meter and reconnect. We coordinate it for you.

Can I get an EV charger without upgrading to 200 amps?

Often, yes. A load-management device or a lower charger setting can make it fit. See do I need a panel upgrade for an EV charger?

Is 400-amp service ever needed?

Rarely for a typical home. Very large homes, homes with several big electric loads, or a home plus shop can need more than 200 amps. The load calculation shows it.

Is a new panel the same as a service upgrade?

No. A panel upgrade replaces the breaker panel. A service upgrade also raises the amperage coming in, which usually means a new meter base and service wires.

Schedule service onlinePick a day and time that works for you.
Loading available times…
Prefer to talk? Call 970-669-1883, 7 days a week, 7am–8pm.
Call 970-669-1883
Eggers Safety Inspection + diagnose/estimate — $89 service charge, credited toward your job. Schedule Service ›

Through Dec 17: donate food for the Larimer County Food Bank and we’ll waive the $89.

Google 4.9 · 400+ reviews

Need an electrician?

On every visit, a licensed Eggers electrician handles the job you called about and runs our full Safety Inspection. There's a $89 service charge — and it is credited toward your job if you move forward.

Through Dec 17: bring non-perishable food for the Larimer County Food Bank and we’ll waive the $89 service charge.

Schedule Service

Have a question? Ask us

or call 970-669-1883 · Call 7 days, 7am–8pm

Ask a question

How can we help?

Send us a message and we’ll follow up. Need help now? Call 970-669-1883.