OVER 50 YEARS★ LOCALLY OWNED ★SINCE1973
Eggers Electric service vans parked at the Loveland shop

Subpanels for garages, shops, basements & additions

A subpanel is a second, smaller panel fed from your main panel. It adds breaker spaces where you need them, like a garage, shop, basement or addition, but it doesn't add total power. Eggers Electric checks that your service has room first, then installs the subpanel, permit included, in Loveland, Fort Collins and Northern Colorado.

Call 970-669-1883
“…they are remarkably responsive to questions and needs during a project.”
Google review · Fort Collins · Feb 2026 EV & inspections
Call 7 days, 7am–8pm

Schedule service or ask a question

Call 7 days, 7am–8pm
Same-day service is often available.

Our promise

  • Upfront pricingYou approve the price before work starts.
  • On-time arrivalWe show up when we say we will.
  • Workmanship warranty1-year workmanship warranty on our work.
  • Licensed electriciansBonded, insured and local.

When a subpanel makes sense

  • Garage or shop. Outlets, lights, or a 240-volt welder or compressor, on their own circuits close to where you use them.
  • Basement finish. New bedrooms, a bath and a family room need several new circuits.
  • Addition or ADU. A subpanel close to the new space keeps wire runs short.
  • Detached garage or shop. A separate building fed from the house.
  • Main panel is full. No open spaces, but the load calculation shows your service has room.

When a subpanel isn't the answer

SituationBetter fit
Your service doesn't have room for the new load100 to 200 amp service upgrade, or load management
Your main panel is damaged, unsafe or an older brand with known concernsPanel replacement first
You only need one or two new circuits and the panel has spacesAdd the circuits to the main panel
Adding an EV chargerOften a direct circuit from the main panel; see EV chargers

Subpanel vs main panel upgrade vs service upgrade

SubpanelMain panel upgradeService upgrade
Adds breaker spacesYes, where you need themYesYes
Adds total powerNoNoYes
Utility involvedUsually noOften for disconnectYes
Good fitFull panel, service has roomMain panel is the problemNot enough capacity

How a subpanel is wired (what we take care of)

  • Feeder. A properly sized cable or conduit from a breaker in the main panel.
  • Separate neutrals and grounds. In a subpanel, the neutral and ground bars are kept separate. Bonding them together in a subpanel is a common DIY mistake.
  • Detached buildings. A subpanel in a separate building needs a 4-wire feeder, its own grounding electrode and a disconnect at the building.
  • Location and clearance. Not in a bathroom or clothes closet, with clear working space in front.
  • AFCI and GFCI. New circuits get the protection the code requires for where they go.
  • Room to grow. We size it with spare spaces for later.

How subpanel installation works

  1. Your visit and Safety InspectionA licensed electrician runs the 8-point safety check and looks at your main panel and service.
  2. Load calculationWe confirm your service can carry the new circuits.
  3. Plan and written priceLocation, size, feeder route and circuits, with a written price.
  4. PermitWe pull the electrical permit.
  5. InstallWe run the feeder, mount and wire the subpanel, and add the new circuits.
  6. Inspection and walkthroughThe city or county inspects, and we label everything and walk you through it. Backed by our 1-year workmanship warranty.

What's included in every visit

On every visit, a licensed Eggers electrician handles the job you called about and runs our full Safety Inspection. There's a $89 service charge — and it is credited toward your job if you move forward.

The 8 points: electrical panel, main grounding & bonding, GFCI protection, smoke & CO detectors, outlets & switches, visible wiring, exterior electrical, and whole-home surge protection. Each one is marked Pass or Needs Attention.

What affects the cost

  • Distance from the main panel and how the feeder gets there (attic, crawlspace, trench)
  • Subpanel size and number of new circuits
  • Detached building requirements (trenching, grounding electrode, disconnect)
  • Finished walls or ceilings in the way
  • Whether the main panel needs work first
  • Permit fees for your city or county

You get a written price before any work starts.

What our neighbors say

400+ Google reviews
“I called them early this morning, and within a couple of hours Chris was here to figure out why one circuit kept kicking the breaker. Turns out it was a floor outlet that had been cooking for a while. We had no clue.…”
Google reviewRepairs & troubleshooting
  • “Andy came to our house to add an electrical outlet. While looking at possible solutions he was able to find us a solution that was half the price of the first solution he came up with…”
    Google review · Loveland · Dec 2025 Wiring, outlets & upgrades
  • “I requested quotes from four Northern Colorado electric companies, and Eggers provided the most competitive rate by a wide margin…”
    Google review · Fort Collins · Jun 2025 Repairs & troubleshooting
  • “We recently moved into a 100 year old house in the historic area of Loveland that had knob and tube wiring throughout…”
    Google review Wiring, outlets & upgrades
  • BBB Accredited Business, A+ rating
  • Eggers Electric Google reviews
  • 2024 Quality Business Awards winner
  • 2023 NoCo Style Readers’ Choice winner
  • Eggers Electric on Yelp
Eggers Electric crew in front of company vans in Northern Colorado

Locally owned in Loveland since 1973. Your neighbors, not a national chain.

About Eggers Electric

Subpanel questions

Questions? Call 970-669-1883 or email info@eggerselectric.com.

Why homeowners choose Eggers

  • Locally owned in Loveland since 1973
  • Licensed electricians
  • Permits pulled and inspections handled
  • Eggers Safety Inspection on every visit

Serving Loveland, Fort Collins and Northern Colorado · 970-669-1883

Do I need a subpanel?

You may if your main panel has no open spaces, or you need several circuits far from the main panel, like in a garage, shop or basement. A load calculation confirms your service has room.

Does a subpanel add capacity?

No. A subpanel adds breaker space but not more total power.

What size subpanel do I need?

It depends on the circuits you're adding and what your service can carry. We size it with spare spaces so you can add later.

Can I put a subpanel in my detached garage?

Yes. A detached building has extra requirements, like its own grounding electrode and a disconnect. We handle them and pull the permit.

Do I need a permit for a subpanel?

Yes. Adding a subpanel needs an electrical permit and an inspection from your city or county.

Is a subpanel safer than adding circuits to my main panel?

Neither is safer on its own; both are safe when done right. A subpanel is useful when the main panel is full or the new circuits are far away.

Schedule service onlinePick a day and time that works for you.
Loading available times…
Prefer to talk? Call 970-669-1883, 7 days a week, 7am–8pm.
Call 970-669-1883
Eggers Safety Inspection + diagnose/estimate — $89 service charge, credited toward your job. Schedule Service ›

Through Dec 17: donate food for the Larimer County Food Bank and we’ll waive the $89.

Google 4.9 · 400+ reviews

Need an electrician?

On every visit, a licensed Eggers electrician handles the job you called about and runs our full Safety Inspection. There's a $89 service charge — and it is credited toward your job if you move forward.

Through Dec 17: bring non-perishable food for the Larimer County Food Bank and we’ll waive the $89 service charge.

Schedule Service

Have a question? Ask us

or call 970-669-1883 · Call 7 days, 7am–8pm

Ask a question

How can we help?

Send us a message and we’ll follow up. Need help now? Call 970-669-1883.