
A GFCI outlet that won't reset usually has one of three problems: it isn't getting power, it still senses a ground fault (often from moisture or a plugged-in appliance), or the GFCI itself has reached the end of its life. Unplug everything, check the breaker and any other GFCI upstream, and let wet outdoor outlets dry. If it still won't reset, a licensed electrician can find out why.
“…they are remarkably responsive to questions and needs during a project.”
Most newer GFCIs need power to reset. A tripped breaker, an upstream GFCI or a loose wire feeding the outlet will keep RESET from latching.
Water in an outdoor box, a damaged cord, or an appliance with a ground fault, like an old freezer or pressure washer, will trip it again immediately.
GFCIs wear out. Newer models test themselves, and many are built to refuse to reset once they can no longer protect you. Replacement is the fix, never a standard outlet.
Newer GFCIs won't reset if the incoming power is connected to the LOAD terminals instead of LINE. This often follows a do-it-yourself replacement.
Long runs of outlets, or outdoor outlets and garage outlets on the same GFCI, give it more places to pick up moisture and small leaks. Splitting the protection can stop repeat trips.
| GFCI outlet | GFCI breaker | |
|---|---|---|
| Where you reset it | At the outlet | At the panel |
| Protects | That outlet, and outlets wired after it | The whole circuit |
| Good when | The first outlet on the circuit is easy to reach | The first outlet is hard to reach, or the circuit feeds several wet locations |
We explain which fits your circuit. See GFCI outlets.
On every visit, a licensed Eggers electrician handles the job you called about and runs our full Safety Inspection. There's a $89 service charge — and it is credited toward your job if you move forward.
The 8 points: electrical panel, main grounding & bonding, GFCI protection, smoke & CO detectors, outlets & switches, visible wiring, exterior electrical, and whole-home surge protection. Each one is marked Pass or Needs Attention.

Questions? Call 970-669-1883 or email info@eggerselectric.com.
Serving Loveland, Fort Collins and Northern Colorado · 970-669-1883
Written by the Eggers Electric team
Usually it has no power, it still senses a fault, or it has worn out. Unplug everything, check the breaker and any other GFCI upstream, and let wet outdoor outlets dry. If it still won't reset, call an electrician.
Water is getting into the box, the cover or a cord connection. A weather-resistant GFCI with an in-use cover, and sealing or replacing the box, usually fixes it.
Yes. GFCIs wear out over time. Many newer GFCIs refuse to reset once they fail their own self-test, so a GFCI that won't reset with no load and good power usually needs replacing.
They may be protected by a different GFCI, sometimes in another room, the garage or outside. Find and reset that one. If none are tripped, the problem may be a loose connection.
No. If GFCI protection is required in that location, it has to stay protected. Replace a failed GFCI with a new GFCI or protect the circuit with a GFCI breaker.
Manufacturers recommend testing monthly: press TEST, confirm the power goes off, then press RESET.
Through Dec 17: donate food for the Larimer County Food Bank and we’ll waive the $89.
★★★★★ Google 4.9 · 400+ reviews
Need an electrician?
On every visit, a licensed Eggers electrician handles the job you called about and runs our full Safety Inspection. There's a $89 service charge — and it is credited toward your job if you move forward.
Through Dec 17: bring non-perishable food for the Larimer County Food Bank and we’ll waive the $89 service charge.
Schedule Serviceor call 970-669-1883 · Call 7 days, 7am–8pm
Ask a question
Send us a message and we’ll follow up. Need help now? Call 970-669-1883.