OVER 50 YEARS★ LOCALLY OWNED ★SINCE1973
Eggers Electric service vans parked at the Loveland shop

Tesla Wall Connector installation. Set up right for your panel.

A Tesla Wall Connector is hardwired to a dedicated 240-volt circuit, and the installer sets its current during setup to match that circuit. On a 60-amp breaker it can deliver up to 48 amps, but many homes do well with a lower setting. We check your panel first, run the circuit, commission the Wall Connector in the Tesla app, pull the permit and meet the inspector.

Call 970-669-1883
“…they are remarkably responsive to questions and needs during a project.”
Google review · Fort Collins · Feb 2026 EV & inspections
Call 7 days, 7am–8pm

Schedule service or ask a question

Call 7 days, 7am–8pm
Same-day service is often available.

Which Wall Connector fits your garage

Tesla Wall ConnectorTesla Universal Wall ConnectorJ1772 charger from another brand
PlugTesla-style (NACS, also called J3400)NACS plus a built-in J1772 adapterJ1772
ChargesTeslas and NACS-port EVs directlyTeslas and most other EVs sold in the U.S.Most non-Tesla EVs; Teslas with an adapter
ConnectionHardwiredHardwiredHardwired or plug-in, by model
Best forA Tesla-only householdA mixed-EV household, or if you might switch brandsA non-Tesla household

More on plugs in our article Can I use a Tesla Wall Connector with any EV?

What we plan before the install

Circuit size and setting

Tesla's installation manual lists the Wall Connector's maximum output for each breaker size, up to 48 amps on a 60-amp breaker. We pick the setting your panel can support and size the wire to match.

Panel capacity

A load calculation shows whether your service can take the charger at full output, at a lower setting, or with load management.

Location and cable reach

Where you park, which side the car's charge port is on, and whether a second car needs to reach the same cable all decide where the unit goes.

Wi-Fi and setup

The Wall Connector is commissioned in the Tesla app. A good Wi-Fi signal in the garage lets it get firmware updates and report charging sessions.

Power sharing

Tesla's Power Sharing lets up to six Wall Connectors split one supply. It's how two Teslas can charge overnight without a bigger service.

Indoor or outdoor

The Wall Connector is rated for indoor and outdoor use. Outdoors, we plan the mounting and wiring for Colorado snow, sun and spray from the driveway.

How we handle a Tesla Wall Connector install

  1. Eggers Safety InspectionA licensed electrician runs our 8-point check and looks at your panel, service size and garage.
  2. Load calculation and settingWe confirm the circuit size and the Wall Connector setting your home can carry.
  3. Written priceYou approve the price for the circuit, mounting and any panel work before work starts.
  4. Permit and installWe pull the electrical permit, run the dedicated circuit, mount the unit and commission it in the Tesla app.
  5. Test, inspect, walk throughWe test a charging session with your car, meet the inspector and show you the breaker and app settings. The work is backed by our 1-year workmanship warranty.

What's included in every visit

On every visit, a licensed Eggers electrician handles the job you called about and runs our full Safety Inspection. There's a $89 service charge — and it is credited toward your job if you move forward.

The 8 points: electrical panel, main grounding & bonding, GFCI protection, smoke & CO detectors, outlets & switches, visible wiring, exterior electrical, and whole-home surge protection. Each one is marked Pass or Needs Attention.

Eggers Electric crew in front of company vans in Northern Colorado

Locally owned in Loveland since 1973. Your neighbors, not a national chain.

About Eggers Electric

Tesla Wall Connector questions

Questions? Call 970-669-1883 or email info@eggerselectric.com.

Why homeowners choose Eggers

  • Locally owned in Loveland since 1973
  • Licensed electricians
  • Permits pulled and inspections handled
  • Eggers Safety Inspection on every visit

Serving Loveland, Fort Collins and Northern Colorado · 970-669-1883

Does a Tesla Wall Connector need a dedicated circuit?

Yes. It's hardwired to its own 240-volt circuit, and the installer sets its current during setup to match the breaker and wire.

What breaker does a Tesla Wall Connector need?

It depends on your panel. Tesla's manual lists the output for each breaker size, up to 48 amps on a 60-amp breaker. A load calculation tells us which size your home can support.

Can I plug a Tesla Wall Connector into a dryer outlet?

No. The Wall Connector is hardwired only; it never plugs into an outlet. If you want a plug-in setup, Tesla's Mobile Connector with the right adapter is the plug-in option.

Can two Teslas share one Wall Connector circuit?

Yes, with Power Sharing. Up to six Wall Connectors can split one supply, and the system balances the current between the cars.

Will a Tesla Wall Connector charge my other EV?

The Universal Wall Connector will, through its built-in J1772 adapter. The standard Wall Connector charges NACS-port cars directly.

Do I need a permit to install a Tesla Wall Connector?

Yes. A new 240-volt circuit needs an electrical permit and inspection in our area. We pull the permit and meet the inspector.

Schedule service onlinePick a day and time that works for you.
Loading available times…
Prefer to talk? Call 970-669-1883, 7 days a week, 7am–8pm.
Call 970-669-1883
Eggers Safety Inspection + diagnose/estimate — $89 service charge, credited toward your job. Schedule Service ›

Through Dec 17: donate food for the Larimer County Food Bank and we’ll waive the $89.

Google 4.9 · 400+ reviews

Need an electrician?

On every visit, a licensed Eggers electrician handles the job you called about and runs our full Safety Inspection. There's a $89 service charge — and it is credited toward your job if you move forward.

Through Dec 17: bring non-perishable food for the Larimer County Food Bank and we’ll waive the $89 service charge.

Schedule Service

Have a question? Ask us

or call 970-669-1883 · Call 7 days, 7am–8pm

Ask a question

How can we help?

Send us a message and we’ll follow up. Need help now? Call 970-669-1883.