OVER 50 YEARS★ LOCALLY OWNED ★SINCE1973
Eggers Electric service vans parked at the Loveland shop

Electrical glossary

The words you'll hear from an electrician, an inspector or a home inspection report, explained in plain English. Each term links to the page where we cover it in more depth. Questions about your own home? Call 970-669-1883, 7 days, 7am–8pm, or Schedule Service online.

Call 970-669-1883
“…they are remarkably responsive to questions and needs during a project.”
Google review · Fort Collins · Feb 2026 EV & inspections
Call 7 days, 7am–8pm

Schedule service or ask a question

Call 7 days, 7am–8pm
Same-day service is often available.

Power basics

TermWhat it means
Volt (V)Electrical "pressure." Most outlets are 120 volts; large appliances like dryers and ranges use 240 volts.
Amp (A)How much current flows. Breakers and wires are rated in amps, and a home's service size is given in amps, such as 100 or 200.
Watt (W)How much power a device uses. Volts multiplied by amps roughly equals watts.
CircuitThe path electricity takes from the panel to outlets, lights or an appliance and back, protected by one breaker or fuse.
Dedicated circuitA circuit that serves only one appliance, such as a microwave, freezer or EV charger. See appliance circuits.
240-volt circuitA circuit that uses both legs of power, for large appliances, EV chargers and many hot tubs.
Leg (of power)Homes get power on two 120-volt legs. Losing one is why half a house can go dark. See half my house lost power.
LoadThe total demand placed on a circuit or on the whole home's service.

Panels and service

TermWhat it means
Electrical panel (breaker box)The metal cabinet where power is split into circuits, each protected by a breaker. See electrical panels.
Main breakerThe large breaker that shuts off power to the whole panel.
Service sizeHow much power your home's service is built to deliver, measured in amps. See 100 to 200 amp upgrades.
Panel upgradeReplacing a panel, often with more capacity or more breaker spaces. See panel upgrades.
SubpanelA smaller panel fed from the main panel to add circuits in a garage, shop or addition. See subpanel installation.
Load calculationA standard method of adding up a home's electrical demand to see whether the service has room for new equipment.
Fuse boxAn older system that protects circuits with fuses instead of breakers. See should I replace my fuse box?
Federal Pacific and ZinscoOlder panel brands with well-documented concerns about breakers that may not trip. See FPE and Zinsco replacement.
Meter baseThe housing on the outside of the home that holds the utility's meter. See electric meter service.
Service drop or service lateralThe utility's overhead line or underground cable that brings power to your meter.
MastThe pipe on the roof or wall that holds an overhead service line.

Breakers and protection

TermWhat it means
Circuit breakerA switch in the panel that turns off a circuit automatically when it's overloaded or shorted. See circuit breaker repair.
Tripped breakerA breaker that has shut off, often sitting in the middle position. Reset it by switching it fully off, then on.
OverloadMore current on a circuit than it's rated for, usually from too many devices running at once.
Short circuitA hot wire touching a neutral or another hot wire, causing a sudden surge of current that trips the breaker.
Ground faultCurrent leaking to ground, through a person, water or metal, instead of its normal path.
GFCIGround-fault circuit interrupter. Shuts off power when it senses current leaking to ground, to protect against shock. See GFCI outlets.
AFCIArc-fault circuit interrupter. Shuts off a circuit when it senses dangerous arcing, to protect against fire. See AFCI breakers.
Dual-function breakerA breaker that provides both GFCI and AFCI protection.
Surge protector (whole-home)A device at the panel that limits voltage spikes before they reach your electronics. See surge protection.

Wiring and grounding

TermWhat it means
Hot wireThe wire that carries current from the panel, usually black or red.
Neutral wireThe wire that carries current back to the panel, usually white.
Loose neutralA failing neutral connection that can make some lights brighter and others dimmer. Call your utility and an electrician right away.
Ground wireA bare or green wire that gives fault current a safe path so a breaker can trip.
Grounding and bondingConnecting the electrical system and metal parts of the home to the earth and to each other, so faults clear safely.
Knob-and-tube wiringVery old wiring with separate wires on porcelain knobs, without a ground wire. See wiring & rewiring.
Aluminum branch wiringAluminum wiring used for outlets and lights in some homes built in the 1960s and 1970s, which needs compatible devices and connectors.
Junction boxA box that encloses wire connections. Every splice belongs inside one.
RewiringReplacing old wiring in part or all of a home. See does my house need rewiring?

Outlets and switches

TermWhat it means
Two-prong outletAn older outlet without a ground slot. See two-prong outlet options.
Tamper-resistant outletAn outlet with shutters that block objects other than a plug, required by current code for most new and replacement outlets in homes. See outlets & switches.
Weather-resistant outletAn outlet built for damp and wet locations, used outdoors with an in-use cover.
DimmerA switch that varies light output. It must be compatible with the bulbs it controls, especially LEDs. See switches & dimmers.
3-way switchTwo switches that control the same light, such as at the top and bottom of stairs.

Generators, EV and permits

TermWhat it means
Transfer switchA switch that safely moves selected circuits from utility power to a generator, so power can't feed back into utility lines. See transfer switch installation.
InterlockA device on the panel that lets a portable generator power the panel only when the main breaker is off. See portable generator connection.
Standby generatorA permanently installed generator that starts automatically when the power goes out. See generators.
Level 2 EV chargerA 240-volt charger that charges an EV much faster than a standard outlet. See EV charger installation.
Load managementEquipment that limits an EV charger or other load when the home's demand is high, sometimes avoiding a service upgrade.
NECThe National Electrical Code, the standard most U.S. electrical work follows. Colorado's statewide minimum is the 2026 edition, effective August 1, 2026; cities and counties adopt editions on their own schedules.
Electrical permitApproval from your city or county to do electrical work, followed by an inspection.
Rough-in and final inspectionThe inspector checks wiring before walls are closed (rough-in), then again when the work is finished (final).
Eggers Electric crew in front of company vans in Northern Colorado

Locally owned in Loveland since 1973. Your neighbors, not a national chain.

About Eggers Electric

Glossary questions

Questions? Call 970-669-1883 or email info@eggerselectric.com.

Why homeowners choose Eggers

  • Locally owned in Loveland since 1973
  • Licensed electricians
  • Permits pulled and inspections handled
  • Eggers Safety Inspection on every visit

Serving Loveland, Fort Collins and Northern Colorado · 970-669-1883

What's the difference between a GFCI and an AFCI?

A GFCI protects people from shock by shutting off power when current leaks to ground. An AFCI protects against fire by shutting off a circuit when it senses dangerous arcing. See GFCI outlets and AFCI breakers.

What's the difference between an overload and a short circuit?

An overload is too much demand on a circuit over time. A short circuit is a sudden fault where a hot wire touches a neutral or another hot wire. Both trip a breaker; a short usually trips it instantly.

What does 200 amp service mean?

It's how much current your home's service is built to deliver. Many older homes have 100 amp service; 200 amps is common for homes with EV chargers, heat pumps or electric appliances. See 100 to 200 amp upgrades.

What is a load calculation?

A standard method of adding up a home's electrical demand to see whether the service has room for new equipment, such as an EV charger or a heat pump.

What does an electrician check on a visit?

On every visit, a licensed Eggers electrician handles the job you called about and runs our full Safety Inspection. There's a $89 service charge — and it is credited toward your job if you move forward.

Schedule service onlinePick a day and time that works for you.
Loading available times…
Prefer to talk? Call 970-669-1883, 7 days a week, 7am–8pm.
Call 970-669-1883
Eggers Safety Inspection + diagnose/estimate — $89 service charge, credited toward your job. Schedule Service ›

Through Dec 17: donate food for the Larimer County Food Bank and we’ll waive the $89.

Google 4.9 · 400+ reviews

Need an electrician?

On every visit, a licensed Eggers electrician handles the job you called about and runs our full Safety Inspection. There's a $89 service charge — and it is credited toward your job if you move forward.

Through Dec 17: bring non-perishable food for the Larimer County Food Bank and we’ll waive the $89 service charge.

Schedule Service

Have a question? Ask us

or call 970-669-1883 · Call 7 days, 7am–8pm

Ask a question

How can we help?

Send us a message and we’ll follow up. Need help now? Call 970-669-1883.