OVER 50 YEARS★ LOCALLY OWNED ★SINCE1973
Eggers Electric service vans parked at the Loveland shop

Heat pump or induction range on the way? Check your panel first.

Heat pumps, induction ranges, heat pump water heaters and EV chargers each add a large 240-volt load. Before you buy, a load calculation shows whether your service and panel can carry them. Many homes can, sometimes with a smaller circuit, a lower EV charger setting or load management. Others need a subpanel, a new panel or a larger service. Knowing first keeps the HVAC or appliance install on schedule.

Call 970-669-1883
“…they are remarkably responsive to questions and needs during a project.”
Google review · Fort Collins · Feb 2026 EV & inspections
Call 7 days, 7am–8pm

Schedule service or ask a question

Call 7 days, 7am–8pm
Same-day service is often available.

New electric appliances and what they need

ApplianceTypical circuitWhat we check
Heat pump (central or ducted)A dedicated 240-volt circuit for the outdoor unit, plus one for backup heat strips if usedNameplate ratings, backup heat size, service capacity
Ductless mini-splitA dedicated 240-volt circuit, often one per outdoor unitBreaker spaces, outdoor disconnect location
Induction range or cooktopA dedicated 240-volt circuit sized to the nameplateExisting range circuit size, or a new run from a gas range spot
Heat pump water heaterA dedicated circuit; some models are 120-volt plug-in, others 240-voltModel's voltage and the circuit already there
EV chargerA dedicated 240-volt circuit sized to the charger settingCharger setting and load management
Electric dryer (from gas)A dedicated 240-volt circuitLaundry space and route from the panel

The installer's manual and the appliance nameplate set the exact circuit size. We size from those, not from a rule of thumb.

Signs your panel will need work

The panel is full

No open spaces for two-pole breakers. A subpanel or a panel with more spaces fixes this, if the service has capacity.

The load calculation doesn't fit

The new loads plus what you already run go past your service size. Then a load-management device, smaller equipment, or a service upgrade is the answer.

Backup heat strips

Heat pumps with large electric backup heat add a big load on the coldest nights. Sizing the backup heat to what you need helps.

Old or problem panels

A worn, damaged, or Federal Pacific or Zinsco panel is usually replaced before big new loads go on it.

Several projects at once

A heat pump this year and an EV next year? Plan the panel once for both.

How we handle an electrification panel check

  1. Eggers Safety InspectionA licensed electrician runs our 8-point check and looks at your panel and service.
  2. Load calculationWe use the electrical code's method for adding loads to an existing home, with your appliance nameplates or spec sheets.
  3. Options in writingYou see whether the panel fits as is, with a subpanel or load management, or needs an upgrade, each with a written price.
  4. Coordinate with your installerWe work with your HVAC or appliance installer so circuits are ready when the equipment arrives.
  5. Permit, install and inspectionWe pull the permit, wire the circuits and meet the inspector. The work is backed by our 1-year workmanship warranty.

What's included in every visit

On every visit, a licensed Eggers electrician handles the job you called about and runs our full Safety Inspection. There's a $89 service charge — and it is credited toward your job if you move forward.

The 8 points: electrical panel, main grounding & bonding, GFCI protection, smoke & CO detectors, outlets & switches, visible wiring, exterior electrical, and whole-home surge protection. Each one is marked Pass or Needs Attention.

Eggers Electric crew in front of company vans in Northern Colorado

Locally owned in Loveland since 1973. Your neighbors, not a national chain.

About Eggers Electric

Panel capacity questions

Questions? Call 970-669-1883 or email info@eggerselectric.com.

Why homeowners choose Eggers

  • Locally owned in Loveland since 1973
  • Licensed electricians
  • Permits pulled and inspections handled
  • Eggers Safety Inspection on every visit

Serving Loveland, Fort Collins and Northern Colorado · 970-669-1883

Do I need a panel upgrade for a heat pump?

Not always. A load calculation shows whether your service can carry the heat pump and any backup heat. Many homes fit; others need a subpanel, load management or a larger service.

Can a 100-amp panel handle a heat pump?

Sometimes, especially in a home with gas heat backup or few other large electric loads. The load calculation is the only reliable answer.

What does an induction range need electrically?

A dedicated 240-volt circuit sized to the range's nameplate rating. Switching from gas usually means running a new circuit to the range spot.

Can I add a heat pump and an EV charger without a service upgrade?

Sometimes. A lower charger setting or load management can keep the total within your service. We check both loads together.

Should the electrician come before the HVAC installer?

Yes, ideally. Checking the panel first avoids a delayed install when the circuit or panel isn't ready.

Do heat pump water heaters need a new circuit?

It depends on the model. Some plug into a standard 120-volt outlet; others need a 240-volt circuit like a standard electric water heater.

Schedule service onlinePick a day and time that works for you.
Loading available times…
Prefer to talk? Call 970-669-1883, 7 days a week, 7am–8pm.
Call 970-669-1883
Eggers Safety Inspection + diagnose/estimate — $89 service charge, credited toward your job. Schedule Service ›

Through Dec 17: donate food for the Larimer County Food Bank and we’ll waive the $89.

Google 4.9 · 400+ reviews

Need an electrician?

On every visit, a licensed Eggers electrician handles the job you called about and runs our full Safety Inspection. There's a $89 service charge — and it is credited toward your job if you move forward.

Through Dec 17: bring non-perishable food for the Larimer County Food Bank and we’ll waive the $89 service charge.

Schedule Service

Have a question? Ask us

or call 970-669-1883 · Call 7 days, 7am–8pm

Ask a question

How can we help?

Send us a message and we’ll follow up. Need help now? Call 970-669-1883.